TX850 Metal Detector (Option:—-1:TX-850 metal detector without headset and bag,2:TX-850 metal detector with headset and bag included in the packing
If you do not have prior experience with a metal detector, we strongly recommend that you:
1): Adjust the Gain to a low setting in the event of false signals.
2): Do not use indoors.This detector is for outdoor use only.Many household appliances emit electromagnetic energy, which can interfere with the detector. If conducting an indoor demonstration, turn the Gain down and keep the search coilawayfromappliances such as computers, televisions and microwave ovens. If your detector beeps erratically, turn off appliances and lights.
Also keep the search coil away from objects containing metal, such as floors and walls.
3): Use a 9-volt ALKALINE battery only. Do not use Heavy Duty Batteries.
Introduction to the TX-850 DEEP PENETRATING GOLD NUGGET HUNTER
The New TX-850 is unique among gold prospecting metal detectors for its combination of high sensitivity to small gold nuggets and its versatile function as an all purpose treasure detector.
The controls and features are tailored to gold prospecting, including a sophisticated ground balancing system, separate control over signal gain and thre shold, and aunique discrimination control system. These features also make for agreatrelic-hunting detector. Whilethe TX-850 makes fora highly competent coin-shooting detector,its user interface and features are not specifically designed for this purpose. As a coin-shooter, you will notice that the TX-850 exhibits slightly lower sensitivity to high-conductivity coins, like a U.S. quarter; this is a resul to fits specialized design to empha-size sensitivity to small, low conductivity metals like gold nuggets.
Mechanical: S-rod with electronics housing on rod, 3-piece breakdown construction, nonmetallic telescoping lower rod, adjustable position armrest
Weight: 2 lbs, 8 oz with battery installed
Standard searchcoil: 11 inch searchcoil
Batteries: Single 9 volt rectangular alkaline
Operating principle: VLF induction balance
Operating frequency: 19 kHz, crystal controlled
Reactive overload: 10,000 micro-cgs (with standard searchcoil)
Resistive overload: 1,200 micro-cgs (with standard searchcoil)
Ground balance range: From ferrite to salt water inclusive
Discrimination ground suppression: Combination of 2 nd and 3 rd order methods
Target-ID ground suppression: 3 rd order
Battery life: 15+ hours on good quality alkaline
Operating temp range: 14 to 122 degrees F (-10 to +50 C)
Operating humidity range: 0 – 90% noncondensing
After detecting a target, do the following:
1. Walk around the target in acircle.
2.While circling the target, conttinue sweeping the search coil across the target.
3.Sweep once every 30° or 40° of the circle.
If the tone does not change and the Target-ID value is consistent as you circle the target, you can be highly confident of the target’s identification.
If the tone or Target-ID changes as you circle the target,you may have multiple targets or an irregularly shaped object.
If the tone completely disappears at different angles, the target may be trash or a low- valuemetal.
If you are new to the hobby, dig all targets. With practice in the field, you will soon be able to correlate audible and visual target feedback with certain types of metal objects.
Pinpointing in Discrimination Mode:
1. Sweep over target in narrowing side-to-side pattern.
2. Takevisual note of spot on ground where “beep” occurs.
3. Step 90° to the side of the target.
4. Sweep searchcoil over same area, at 90° to 1st sweep pattern.
5. This pinpoints the target location with an “X.”
After you have identified a target using Discrimination Mode,press-and-hold the PINPOINT button to identify the target’s exact location. This technique can yield more information about the target’s shape and size and also find its exact location to facilitate extraction.
Pinpoint as follows:
1. Position the searchcoil just barely off the ground, and to the sideof the target.
2. Now move the searchcoil slowly across the target; you can locate it by the sound. The target is located directly under where the sound is loudest.
Narrow It Down:
1. Tonarrow the response further, position the center of the searchcoil
near the center of the response pattern, but not directly over the
2. Release the PINPOINT button.
3. Press-and-hold PINPOINT button again.
4. Repeat this narrowing procedure to narrow the field of detection further.
Note: Depth indication is less accurate after narrowing.
>>>Shipping & Handing
Most items from our store would be shipped within 3working days upon payment verified by Aliexpress
The shipping cost quoted DOES NOT include extra charges for remote area listed by Express companies
ETA(Estimated Time of Arrival)displayed in the listing is given by shipping companies but that can not be as reason of delivery delayed dispute. We will NOT be responsible for any delay during delivery including but not limited to customs postage checking, strike, force majeure etc.
Russian buyers were required to fill in the full name; Brazilian buyers are required to leave CPF/CPNJ Number;
Chilean buyers are required to leave RUT number.
>>>Custom Duty & Taxes
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer responsibility.
Please check with your country customs office to determine what these additional costs will be prior to bidding/buying.
If you receive an item not as described,please contact us within 7 days and return the item for the correct one.
If you receive an item DOA (damage on arrival) or a defects products, please contact us. A replacement or refund will be offered after communication. Some low-valued items might not be returned.
All NON-Seller Mistake returns, shipping and handling fee would be on buyer’s account
All return products should be in original package with all accessories included.
We stand behind our products so you are always covered!
To prove it we offer a FREE Six-MONTH limited warranty. Please read the following important details regarding the Warranty Policy.
We warrant all products to be free from defects in material or workmanship for at least 6 month from date of purchase.
We fully guarantee customers an exchange or refund within 7 business days if item DOA (damage on arrival).
Warranty excludes normal product lifetime wear-out, wear and tear or abuse.
Warranty does not apply to conditions resulting from misuse, abuse, negligence, accident, improper application, improper installation or alteration.
Please DO contact us first if there is any problem with payment, delivery or products received. Negative feedback will do no help to solve the problem.